StockFetcher Forums · General Discussion · TheRumpledOne<< >>Post Follow-up
sulldt
31 posts
msg #36776
- Ignore sulldt		 7/7/2005 3:04:49 PM

This isn't a challenge, just trying to see if you have any idea on how,or if, this filter is doable.Take a 50 dollar stock, run it up to 70 over a period of 2 months,have it drop back to 60 in a couple of weeks, then move back up to 70.My thinking is that a stock that has been in a 2 month uptrend pulls back a little and if it can take out the previous high on the next upturn it's a bullish signal. In other words, if it can take out that 70 dollar resistance level you buy calls. If it fails to take it out and rolls over you buy puts. Logical thinking? I've tried using verbal commands on the filter but it only displays 2 of my three commands and the third doesn't show up. What I tried was "Show stocks where close is 10% above 2 week low(the bounce back) and close within 1% of 4 week high and close 4 weeks ago was 20% above close 8 weeks ago.What do you think? Valid hypothesis
TheRumpledOne
6,411 posts
msg #36781
- Ignore TheRumpledOne		 7/7/2005 9:41:38 PM

Fetcher[
Show stocks where close is 10% above 2 week low
and close within 1% of 4 week high
and close 4 weeks ago is 20% above close 8 weeks ago
and close above 49.99

add column Low 2 week low
add column high 4 week high
add column close 8 weeks ago
]



There's your filter.

Is that what you wanted?

Can't resist...lol...

CLICK ON THE MAGNIFYING GLASS ICON to the left of Fetcher:


Fetcher[
/* your filter code goes below this line */

Show stocks where close is 10% above 2 week low
and close within 1% of 4 week high
and close 4 weeks ago is 20% above close 8 weeks ago
and close above 49.99

add column Low 2 week low
add column high 4 week high
add column close 8 weeks ago


sort column 5 descending

/* STOCK DASHBOARD DISPLAY for newbies and old pros */

set{E36b,days(ema(3) is above ema(6),100)}
set{E36a,days(ema(3) is below ema(6),100)}
set{E3xE6, E36a - E36b}

set{E50200b,days(ma(50) is above ma(200),100)}
set{E50200a,days(ma(50) is below ma(200),100)}
set{M50xM200, E50200a - E50200b}

set{E1326b,days(ema(13) is above ema(26),100)}
set{E1326a,days(ema(13) is below ema(26),100)}
set{E13xE26, E1326a - E1326b}

set{CCb,days(close is above close 1 day ago,100)}
set{CCa,days(close is below close 1 day ago,100)}
set{CxC, CCa - CCb}

set{E5b,days(close is above ema(5),100)}
set{E5a,days(close is below ema(5),100)}
set{CxE5, E5a - E5b}


set{E50b,days(close is above ma(50),100)}
set{E50a,days(close is below ma(50),100)}
set{CxM50, E50a - E50b}

set{E200b,days(close is above ma(200),100)}
set{E200a,days(close is below ma(200),100)}
set{CxM200, E200a - E200b}


set{T10, count(10 day slope of the close above 0,1)}
set{T60, count(60 day slope of the close above 0,1)}
set{T200, count(200 day slope of the close above 0,1)}

Set{a1, T200 * 1}
Set{a2, T60 * 10}
Set{a3, T10 * 100}

Set{aa, a1 + a2}
Set{TREND, aa + a3}

set{v, volume 1 day ago}
set{volinc, volume - v}
set{volpc, volinc / v}
set{volpct, volpc * 100}

set{VolZ, days(volume < 1,100)}
set{VolUp, days(volume is below volume 1 day ago,100)}
set{VolDn, days(volume is above volume 1 day ago,100)}
set{VolCnt, VolUp - VolDn}

set{vck1, volume 1 day ago }
set{vck, volume / vck1 }
set{vdbl, days(vck < 2, 100)}


set{PARBuy, count(close crossed above Parabolic SAR, 5) }
set{DMIBuy, count( di(14) Difference crossed above 0 , 5) }
set{DMIBuyX, count( di(14) Difference above 0 , 1) }

set{PARSell, count(close crossed below Parabolic SAR, 5) }
set{DMISell, count( di(14) Difference crossed below 0, 5) }
set{DMISellX, count( di(14) Difference below 0, 1) }

set{PARSBuy1, PARBuy * DMIBuy}
set{PARSBuy, PARSBuy1 * DMIBuyX}

set{PARSSell1, PARSell * DMISell}
set{PARSSell, PARSSell1 * DMISellX}

set{PARSTrade, PARSBuy + PARSSell}

set{HiOp, high - open}

set{WRb,days(Williams %R(10) is above Williams %R(10) 1 day ago,100)}
set{WRa,days(Williams %R(10) is below Williams %R(10) 1 day ago,100)}
set{WRxWR, WRa - WRb}

and add column VolCnt
and add column Vdbl
and add column volpct

and add column HiOp
and add column Trend

and add column CxC {CxC_}
and add column CxE5 {CxE5}

and add column E3xE6 {E3xE6}
and add column E13xE26 {E13xE26}


and add column CxM50
and add column CxM200
and add column M50xM200

add column rsi(2)
add column weekly rsi(2)

add column PARSBuy
add column PARSSell

add column WRxWR

and draw RSI(2)
and draw ema(5)

and draw Williams %R(10)

and draw Parabolic SAR
and draw +di(14)
and draw -di(14)
and draw adx(14)
and draw di(14) difference

]




MAY ALL YOUR FILLS BE COMPLETE.
Taprofits
4 posts
msg #36800
- Ignore Taprofits		 7/9/2005 12:54:13 AM

and show stocks prior to the tremendous breakout.


StockFetcher Forums · General Discussion · TheRumpledOne<< >>Post Follow-up

StockFetcher Tools
Filter Editor
My Filters
Watch Lists
Chart+
Find Similar Stocks
Shared Lists
Popular Resources
StockFetcher Forums
Indicator List
Filter Phrases
Examples
Site Search
Sector/Industry List
Usage Guide
Support
Contact Us
Support Home

Subscriber
Subscriber Benefits
Settings
Chart
Results
MyFilters
*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.


Copyright 2022 - Vestyl Software L.L.C.•Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.